Maintenance; Cleaning The Filter; Cleaning The Hood; Replace Led Lamp - Sirius SU900 Notice D'utilisation Et D'entretien

The hood-fan should provide many years of
trouble free service provided it is maintai-
ned properly.

Cleaning the Filter.

Clean the grease filter either by carefully
hand washing, (so as not to damage the fil-
ter design) or, preferably in a dishwasher. De-
pending on use, the filters should be cleaned
at least every two weeks in a dishwasher.
If a carbon filter has been fitted this must be
replaced at least every 6 months as a mini-
mum. Depending on cooking style and na-
ture of cooking (greasy foods, fry's, curries
etc) would probably require more frequent
replacement - if odors start to manifest
themselves when cooking it is time to repla-
ce the carbon filter . We suggest you retain
a spare set. These can be ordered from the
supplier of your range hood.

Cleaning the Hood.

Cleaning of the internal parts should be done
with a clean damp (not excessively wet) cloth
together with regular household detergent.
The external stainless steel elements should
be cleaned with a good quality foaming stain-
less steel cleaner. Read the manufacturers di-
rections. Generally they recommend that the
foam be sprayed onto a clean dry cloth and
then applied to the stainless steel. Allow the
foam to react on the surface for a few minutes
and then wipe with a clean dry cloth.
On the surfaces that are exposed directly
to heat from the cook-top, it is advisable to
clean these on a regular basis to avoid the
marks from becoming baked on.
Do not under any circumstances use an
abrasive type cleaner as this will scratch and
damage the stainless steel finish. Glass com-
ponents should be cleaned with a product
such as Windex.
M A I N TE N A NCE
15
Replace led lamp
SUE900-SU901–SU902-SU908
To replace the led lamp, remove the lamp
(Fig. 15) inserting a screwdriver or another
sharp tool between the lamp and its chro-
me support and replace it with a lamp of the
same kind.
Replace the led lamp SU903 - SU923 -
SUE923
Before replacing the led lamp switch off the
appliance using appropriate tools and then
remove the led lamp from its slot (Fig. 16).
Take out the led lamp from its connector and
replace it with an another one with similar
characteristics.
To find the correct led lamp please check on
the replacement part list.
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order
to avoid a hazard.
SU900–SUT900-