fig. 11
Re-Circulating Requirements.
If the unit is to be used in the re-circulating
mode, fit the carbon filter after the installa-
tion is complete (refer to Figure 12) fit the
deflector (refer Figure 13) with the screws
supplied to the upper telescope chimney.
There are holes in the back upper edge of
the decorative chimney for this purpose. A
short length of ducting is connected betwe-
en the exhaust outlet on the fan and the de-
flector to direct the air back into the kitchen
through the vents at the top of the upper de-
corative chimney.
The carbon filter (supplied separately) that
absorbs odors is installed behind the alumi-
nium grease filter (refer to Fig 14).
fig. 12
fig. 13
fig. 14
10