First Steps; Assembly - BRAND accu-jet pro Mode D'emploi

Is everything in the package?
Confirm that your package includes:
• Pipette controller
• Nickel-metal hydride battery
• 2 battery compartment covers
a) smoothly rounded
b) with ridges to place the instrument
inverted on the bench
• AC adapter
• 2 spare membrane filters 0.2 µm
• Wall support
• Operating manual

Assembly

1.
Grip battery plug by the wire, confirm
alignment of the plug and insert it in the
socket. Push it firmly into the socket until
you can hear it snap into place. Place bat-
tery in compartment.
2.
Select battery compartment cover:
a) smoothly rounded
b) with ridges for resting the
instrument inverted on the bench
(s. page 34).
3.
Close battery compartment.
4.
Recharge the battery. Charging time is
4 hours (s. page 38).

First Steps

a
b
1
3
33