Bottle Stand; Error Limits - BRAND Dispensette S Mode D'emploi

6 Error limits

5.3 Bottle stand

For small bottles, and when using the flexible discharge tube, use a bottle stand to prevent tipping
over (Accessories/spare parts, p. 55).
Assembly
6 Error limits
20 °C
!
Ex
Error limits
Nominal volume ml
10
*A = Accuracy, CV = Coefficient of Variation
V
N
A
=
T
V
T
e.g.
V
N
V = 50% N
T
V = 10% N
T
*A = Accuracy, CV = Coefficient of Variation
The error limits in DIN EN ISO 8655- 5 are significantly lower. The maximum error for a single measure-
ment can be approximated from the sum of error limits EL = A + 2 × CV (for 10 ml: 50 µl + 2 x 10 µl = 70
µl).
46
Operating manual
a.
b.
c.
Error limits in relation to the nominal capacity (= maximum
volume) indicated on the instrument at equal temperature
(20 ºC/68 °F) of instrument, ambient environment and dis-
tilled water. Testing takes place according DIN EN ISO 8655-
6 with a completely filled instrument and with uniform and
smooth dispensing.
A*
0.5
Partial volumes
. A The percentage values for A and CV are relative to the nomi-
N
nal volume (V
(V ).
p
Volume
A*
10.0 0.5
5.0 1.0
1.0 5.0
Position the mounting plate at the appropriate height.
As shown, insert the instrument firmly into the holder
until it audibly clicks into place.
Then lock the holder into place with the screw.
μl
± %
≤
50
) and must be converted for partial volumes
N
μl
± %
≤
50
50
50
NOTICE
μl
CV* %
≤
0.1 10
μl
CV* %
≤
0.1 10
0.2 10
1.0 10
9974 91