First Steps; Assembly - BRAND seripettor Mode D'emploi

Is everything in the package? Confirm that your package includes:
seripettor :
®
Bottle-top dispenser seripettor
bottle adapters (PP) and this operating manual.
seripettor pro:
®
Bottle-top dispenser seripettor
discharge tube and filling valve, mounting tool, bottle adapters (PP) and this operating manual.
Adapters for bottle thread
seripettor
® GL 32-33, S 40
seripettor pro
® GL 32-33, S 40

Assembly

Warning:
Wear protective clothing, eye protection and gloves! Follow all safety
instructions and observe limitations of use and operating limitations
(pages 28-30).
1.
Check seals
2.
Mounting the
discharge tube
, discharge tube, filling tube, spare dispensing cartridge,
®
pro, discharge tube, filling tube, spare dispensing cartridge, adapter for
®
Filling tube length
250 mm
125 - 240 mm
Before mounting the discharge tube
make sure that the seal is inserted.
seripettor :
®
sealing ring, discharge valve, discharge
tube (fig. 1).
seripettor pro:
®
sealing ring, adapter, gasket, discharge
tube (fig. 1').
seripettor :
®
Slide the discharge tube onto the valve
block and firmly finger-tighten the locking
nut (fig. 2).
pro:
seripettor
®
Slide the discharge tube onto the adapter
and firmly finger-tighten the locking nut.
Then, slide the adapter onto the valve
block and firmly finger-tighten the locking
nut (fig. 2').
Note:
Check the discharge tube for a tight fit.
After two days tighten up the locking
nut(s).

First Steps

1
1'
2
2'
33