Maintenance Menu; Maintenance Menu - All Models Except Style 7D-7E - Bodet Style 5 Notice D'installation Et De Mise En Service

XI

– Maintenance menu

To access the maintenance menu, open the configuration menu by pressing and holding "S",
then "+" for 3 seconds. Release both keys, then press and hold "S", then "+" again for 7 seconds.
11.1 Maintenance menu – all models except Style 7D-7E-10D-10SD
Radio synchronisation (ALS(FI)+DCF)
+
S
+
Hold down for 3 seconds
Open configuration menu
+
S
+ Hold down for 7 seconds
Software version
May differ from the version shown depending on the date of purchase.
S
+
S
S
+
S
+
S
+
S
Display test (tests for correct functioning of all LEDs)
S
End of menu
30
+
Select radio synchronisation
The double hyphen indicates good reception
+
+ +
...
Resetting the clock (enabled if "rstY" is selected)
Restore to factory settings (enabled if "dF Y" is selected)
Search the information frame in accordance with
the selected synchronisation. Default: Auto mode.
Wait for the ALS(FI) signal for about 3 minutes before checking
DCF synchronisation then synchronisation of another antenna (e.g. GPS).
Check reception from an antenna if one is connected.
Dynamic display of ALS(FI) or DCF signal frames
+ +
...
EN
Set T° offset
(Style 10-10S)