After Each Use; Important Safety Precautions; Maintenance Procedures - Bradley Smoker BS611 Série Manuel Du Propriétaire

After Each Use

• Unplug smoker when it is not in use.
See "Maintenance Procedures" section.
• Place extinguished Bradley Flavor
Bisquettes® at a safe distance from all
structures and combustible materials.
Refer to the External Components List & Internal Components List Diagrams

Important Safety Precautions

• The Bradley Smoker must be
maintained and cleaned after each use.
• Unplug the Long Power Cord prior to
commencement of any maintenance or
cleaning.
• Do not immerse smoker in water.
• Do not spray inside of smoker with
any kind of appliance cleaner.
• Do not cover or seal the Racks or Drip
Tray with aluminum foil. This can cause
severe damage to your smoker.
• Do not leave unattended when in use.
• Do not spray or clean the smoker with
excessive amounts of water. Instead use a
damp cloth.

Maintenance Procedures

• Use caution when handling and
cleaning your smoker as some metal
edges may be sharp.
• Clean out the Drip Bowl. Dispose of
all burnt Bisquettes carefully as they may
still be hot.
• Wash the Drip Tray, Racks, Bottom
Rectangular Tray and Drip Bowl with
Save these Instructions
General Maintenance
4
• Store the smoker in a dry covered place
out of reach of children.
• Clean out any grease. Grease build up
may cause fire.
• Do not steam clean this appliance.
hot water and dish detergent or put
them in the dishwasher.
• Remove food particles and grease
residue from the smoker. If the inside
needs cleaning, wipe it with a damp
cloth.
• Note: The tower should have smoke or
black residue on the inside. The more
residues, the better the product will taste.
• The Smoke Generator should be kept
clean and free of wood chips and grease
at all times. If loose wood chips have
collected in the Smoke Generator,
simply blow or vacuum these particles
away.
• Unplug the Long Power Cord before
removing the Smoke Generator from the
Smoke Tower. Refer to "To remove
Smoke Generator" in "Assembly
instructions".
• The Bisquettes Burner should be
lightly scraped using a wire brush or
scraper to remove any residue that has
been left by the burning process.