Bradley Smoker BS611 Série Manuel Du Propriétaire page 17

For The Bradley Smart Smoker® with iSmoke Technology®
Refer to Part Numbers in External Components List Page 17, Internal Components List Page
How to Assemble the
Bradley Smart Smoker®
1. Remove smoker from box.
2. Take all packaged parts out of smoker.
3. Remove all protective packaging.
Install Bluetooth® Smoke Generator:
• Attach Smoke Generator (1) to the
Smoker Tower (2) by placing the
Bisquette Burner (E) through the left side
opening of the tower. Align the generator
keyholes to the two supports (3) on the
side and push down to secure in position.
• Insert the feeder tube (4) into the top of
the smoke generator. Push down firmly.
Load with desired number of Bradley
Flavor Bisquettes®.
Electrical Connection Set Up (see page
19)
• Plug the Sensor Cable (1) into the back
of the Smoke Generator Sensor •
Receptacle (A) and Smoker Tower Sensor
Receptacle (B).
• Plug the Short Power Cord (2) into the
back of the Smoke Generator Female
Receptacle (D) and then into the back of
the Smoker Tower Male Receptacle (C) –
push firmly.
• Plug the Long Power Cord (3) into the
power receptacle (E).
Assembly Instructions
Model BS 916 and BS 916 CE
18 and Electrical Connection Set Up Page 19
Set Up Smoker Tower:
• Place Racks,(B) onto side supports.
• Place Bisquette cover (A) above the
Bisquette Burner (E). Align the cover
keyholes to the three support pins on the
side and push down to secure in position.
• Place the Rectangular Tray (D) on the
bottom of the Smoker.
• Fill the Drip Bowl (C) 3/4 full with
water and place in the center of
Rectangular Tray (D) to catch burnt
Bisquettes. Empty and refill your water
bowl every 2 hours
• Plug the Long Power Cord (3) from the
Smoke Generator into an approved
grounded electrical outlet (4).
To Remove Smoke Generator (see page
19)
Make sure the Smoke Generator has had
time to cool down. Unplug Long Power
Cord (3) from the wall outlet (4) and from
the Smoke Generator (E). Detach Sensor
Cable (1) and Short Power Cord (2) and
then remove Smoke Generator from the
Smoker Tower by raising it gently upward
and pulling it outward.
16