Sound And Vibration Information - TOOLCRAFT 1619737 Notice Originale

Operating / storage conditions ..........................0 to +40 °C, 20 – 85 % RH
Dimensions (W x D x H) ...................................800 x 240 x 185 mm
Weight ..............................................................approx. 4.7 kg
b) Sound and vibration information
Noise emission value L
Noise emission value L
Vibration level ................................................... Main handle: 3,707 m/s
Uncertainty K ....................................................1,50 m/s
The vibration emission level given has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. The declared vibration value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used.
Identify additional safety measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
Steps to minimise the vibration exposure risks
• Always use sharp blades.
• Maintain this product in accordance with these instructions and keep the blades well lubricated.
• Avoid using tools in temperatures below 0 °C.
• Always wear protective gloves.
• Plan the work schedule to spread any high-vibration tool use across a number of days.
..................................97 dB(A)
PA
..................................105 dB(A)
WA
Auxiliary handle: 3,597 m/s
2
2
2
61