Operating Elements; Setup And Preparation; Saw Chain And Guide Bar Assembly - TOOLCRAFT 1619737 Notice Originale

6. Operating elements

(Ú Fold-out page)
1 Guide bar
2 Saw chain
3 Front hand guard
4 Front handle
5 Oil cap
6 Safety lock
7 Switch trigger
8 Rear handle
9 Spiked bumper
10 Engine
11 Power cord with power plug
12 Minimum oil level indicator
13 Oil reservoir window
14 Cord retention hook

7. Setup and preparation

Do not connect the product to the mains before it is completely assembled.
Always wear gloves when handling the saw chain (2).
a) Saw chain and guide bar assembly
1. Remove the sprocket cover (18) by turning the chain tensioning knob (16) in a counter-clockwise direction.
2. Take the sprocket cover away.
Fig. 1
40
15 Cord opening
16 Chain tensioning knob
17 Saw chain direction indicator (guide bar)
18 Sprocket cover
19 Drive sprocket
20 Guide bolt
21 Saw chain direction indicator (chain saw)
22 Lubrication oil outlet
23 Tensioning pin
24 Saw chain rotation direction indicator
25 Guide bar slot
26 Saw chain slot
27 Lubrication hole (on both sides)
28 Guide bar cover