Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
www.MCS-Heater.com
IMPORTANT: READ AND UNDERSTAND THIS OPERATIONAL MANUAL
BEFORE PERFORMING ASSEMBLY, COMMISSIONING OR MAINTENANCE
ON THIS HEATER. INCORRECT USE OF THE HEATER CAN CAUSE SERIOUS
INJURY. KEEP THIS MANUAL FOR FURTHER REFERENCE.
INDEX
PRODUCT PRESENTATION
XL 9 is a generator of heat by radiation. Radiation technology
is based on the same physical principle behind the warmth
of sunlight. The sun heats bodies without a flow of warm air
but by waves of radiation. The radiation method is becom-
ing highly popular among professional clients because of the
countless advantages it offers. XL 9 was designed on the
basis of this physical principle and has become irreplace-
able in environments which require a constant, even source
of heat for warmth, defrosting and drying. In addition, its ex-
tremely low noise level makes it suitable for working without
having to put up with the noise that other types of heater nor-
mally produce. The generator has rubber wheels for ease
of movement and it can also be raised and set at different
heights by means of eyebolts. Its extended autonomy and
automatic thermostat function grant the operator maximum
freedom of use. The external fuel-tank indicator provides
an easy check on whether fuel needs topping up. The SR
model has a dual power device that enables a more efficient
use of the machine under different conditions and during the
various seasons of the year.
UNPACKING AND PACKAGING
UNPACKING
• Remove the supports used to pack the appliance (Fig. 1).
• Open top side of the box.
• Remove the cardboard from the top.
• Remove the supports that hold the generator to the pallet
(Fig. 2).
• Delicately lower the heater off the pallet.
• Dispose of the material used to pack the generator ac-
cording to the current government regulations in your
area.
• Check the machine for eventual damages incurred during
transportation, if the machine appears damaged immedi-
ately inform the store where you purchased it.
800 292-3279
Figur 1 - Packaging
ON PACKAGING AND STORING
WARNING: The packaging material is not a toy.
Keep the plastic bag out of the reach of children;
danger of suffocation!
If the generator needs to be placed in storage, or if it
has suffered major damage in transport, or needs to be
repaired:
• Check for damage, in particular of a nature which could
cause loss of fuel. In this case, empty the tank of the
remaining fuel.
• For storage, place the generator on the same pallet from
which it was unpacked and, for return, on any suitable
EPA-branded euro-pallet.
• Firmly anchor the generator to the pallet (Fig. 2).
• Whenever possible, slide the cardboard packing from
the top down over the pallet and anchor it firmly using
suitable materials (Fig. 1).
• Store the machine in a suitable, dry place and do not
stack more than two. Despatch the generator preferably
as shown Fig. 1 or at least as shown in Fig. 2.
Figur 2 - On pallett
2
en
Publicité
Chapitres
Table des Matières
Dépannage
