Publishing Notes; Explanation Of Symbols; Required Tool And Auxiliaries; Description - Hauff-Technik HSN Instructions D'installation

HSN/HSD/HSDD and WRD
Contents
1 Publishing notes ...............................................16
2 Explanation of symbols ....................................16
3 Required tool and auxiliaries ...........................16
4 Description ........................................................16
5 Preparing for assembly ....................................16
6 Assembly of the closed press seal for pipes
to be newly laid (D=100 - 200 mm) from
outside of building ..........................................17
6.1 R etrofi tted splitting of press seal on already
laid pipes (only for HSD) .................................17
7 Assembly of the closed press seal for pipes
to be newly laid (D=100 - 200 mm) from
inside of building .............................................17
8 Assembly of the split press seal on already
laid pipes (D = 250 - 500 mm) from outside
of building ........................................................17
9 Assembly of the split press seal on already
laid pipes (D = 250 - 500 mm) from inside
of building ........................................................18
10 Mount the WRD sealing set .............................18
11 Disassemble the press seal and the sealing
set ......................................................................18
12 Attaching the FHRK seal ...................................19
1

Publishing notes

Copyright © 2019 by
Hauff-Technik GmbH & Co. KG
Dept.: Technical Editing
Robert-Bosch-Straße 9
89568 Hermaringen, GERMANY
Tel. +49 7322 1333-0
Fax +49 7322 1333-999
E-Mail offi ce@hauff-technik.de
Internet www.hauff-technik.de
Reproduction of these assembly instruction - even in
extracts - in the form of reprint, photocopy, on electro-
nic data media or using any other method requires our
written consent.
All rights reserved.
Subject to technical alterations at any time and without
prior announcement.
These installation instructions form part of the product.
Printed in the Federal Republic of Germany.
2

Explanation of symbols

1
Work stages
►
Effect/result of a work step
1
Reference numerals in drawings
3

Required tool and auxiliaries

To install the HSN/HSD/HSDD press seals correctly, you
will need the following tools, auxiliaries and accessories in
16
addition to the usual tools:
Tools:
1 Torque spanner
1 Extension
1 Socket SW5/SW6/SW8
Auxiliaries:
Lubricant
KR M.T.X. cable cleaner (Hauff)
Vernier calliper
Cleaning cloth
To install the WRD correctly, you will need the following
tools and aids in addition to the usual tools:
1 Torque spanner
1 Extension
1 Internal hexagon socket SW3 or SW4 or SW 5 or SW6
1 External hexagon socket SW6 or SW8 or SW10 or
4
Description: HSD250 G 1x159 b40 (see fi g.: 1).
Legend for fi g.: 1
1
2
3
4
Description: WRD150 (see fi g.: 2).
Legend for fi g.: 2
1
2
3
-
5
1
Art. Nr.: 5090032098 Rev.: 07/2019-11-11
or
SW13 or SW17 (see table 3)

Description

Elastomer segment HSD250 G 1x159 b40
(Grade: EPDM or NBR)
Press plate U-profi le
Allen screw
Pipe
Press seal
Corrugated cable duct
Split ISO ring
Ring clips (not visible in fi gure)

Preparing for assembly

Clean the core drilling/liner and media line.
Level out any chips and/or voids which may be
present.
Check the diameter tolerance of the core drilling/
liner (D -1+2 mm) and media line (d -2+1 mm), as
well as outer or drilling dimension of the press seal
(see fi g.: 3).
The wall sleeve must be dimensionally accurate,
smooth and inherently stable.
EN