Technical Problems, Warranty, Maintenance And Cleaning; Technical Problems; The Device Does Not Want To Start; No Function Seems To Be Working - GymnaUniphy fitvib Excel Mode D'emploi

6. TECHNICAL PROBLEMS, WARRANTY,
MAINTENANCE AND CLEANING

6.1 Technical problems

6.1.1 The device does not want to start.

Check whether there is any power, whether the power switch is on and whether power cable and fuses
are okay. If the fuses have blown, you may want to replace them yourself, but make sure that you only
use the type of fuse indicated on the type plate. You can ask your supplier to order the right fuses for you.

6.1.2 No function seems to be working

Switch the device off and on again. Contact your supplier if the problem persists .

6.2 Warranty and service

•
Only duly authorized service engineers are entitled to carry out repairs or modifications and to
add elements to the device.
•
The electrical system of the user must comply with all laws and regulations.
•
The device must only be operated by duly authorized persons in strict compliance with the user
manual.
•
The device must only be used for its designated purpose.
•
The device must be regularly maintained in compliance with the maintenance instructions.
•
All legal restrictions concerning the use of the device must be complied with.
Apart from the fuses, there are no components inside the "fitvib
exchanged and replaced by the user. In the event of incorrect use and non-compliance with the
maintenance instructions, the Uniphy Elektromedizin GmbH & Co. KG and their duly appointed
representatives will cease to be liable for all resulting damages, personal injuries, defects or
malfunctions. Customer service and warranty will be provided through your supplier. The terms and
conditions of your supplier will apply. The warranty will be invalidated by any violation of the
aforementioned instructions. The device is expected to have a technical life of 10 years.

6.3 Maintenance

The manufacturer recommends to subject the device to an annual inspection by an engineer. The
following components should be checked with particular attention:
all bolted and mechanically clamped connections
all cables and their connecting elements (visual control)
the functional safety of the manual switch and the foot switch
the rubber springs (visual check for mechanical damage)

6.4 How to clean the device

You can use a slightly moist cloth to clean the vibration plate, the control unit and the accessory items.
Use a mild and non-abrasive detergent!
The handle, if necessary, can be treated with a commercial disinfectant.
e
fitvib xcel User Manual, Version 01/2005
e
xcel" vibration device which may be
17