Operation; Introduction; How To Operate The "Fitvib E Xcel" Vibration Device; Start-Stop Switch - GymnaUniphy fitvib Excel Mode D'emploi

4. OPERATION

4.1 Introduction

e
The "fitvib xcel" vibration device generates three-dimensional mechanical vibrations of the main vector in
vertical direction.
e
The "fitvib xcel" vibration device is extremely easy to operate. The operating principle is clear and self-
evident.
The device can be operated with and without a time card control. Devices without such a time card
control unit can be easily identified: the actual time is indicated at the top of the display.
Devices with a time card control system request you (by flashing symbols in the display) to insert the time
card. Once you have inserted the card, your current time credits are displayed instead of the time.
On the last page of this manual, you will find a fold-out diagram of the device with all accessory items.
The numbers in the diagram and the text refer to the same items.
4.2 How to operate the "fitvib
Turn the power on to display the screen as shown (11). Now simply use the start buttons (7) on the
control unit (6), the manual switch (22) or the foot switch (3) to start the programme.
The device is in the operating mode "free". All parameters can be changed with the +/- buttons (9, 10, 12,
13). Use the "Intensity" button (8) to select the right vibration amplitude ("Hoch (HIGH)" or "Niedrig
(LOW)". You can change the parameters both when the plate vibrates and when it is inactive.
Use the button "Operating Mode" to switch from the default operating mode "FREE" (free choice of
parameters) to either one of two fixed programmes. You can only do this when the machine is in rest
mode (push STOP first). You cannot switch operating modes while the plate is vibrating.
The actual time is shown in the top section of the display (see5.4 how to adjust the time).
If the function "Time Card" has been activated, you must insert a time card (with time credits) into the
card slot (15) before you can start the device. You are prompted to do this by the animated card symbol
in the lower section of the display (11). Once you have done this, the time credits will be shown in the top
section of the display (instead of the time).
Fig. 4 - Display

4.3 Start-stop switch

e
The "fitvib xcel" vibration device has been equipped with three start-stop switches, all of them capable of
starting and stopping the vibration independently from one another:
two orange-coloured start-stop buttons (7) are located on the control unit;
one start-stop foot switch (3) is located on the handle frame at the level of the vibration plate;
the manual switch (22) is connected by cable with the control unit.
Each one of the three start-stop buttons can serve to start and stop the vibration at any moment,
independently from the position.
e
fitvib xcel User Manual, Version 01/2005
e
xcel" vibration device
13