Connecting And Starting The "Fitvib E Xcel" Vibration Device (Fig. 1); Deactivation And Disposal - GymnaUniphy fitvib Excel Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

After this you can attach the handle to the vibration base plate (see fig. 3):
Use the hexagonal screws (44), spring rings (43) and disks (42) to attach the electronic unit (30) to the
base plate of the vibration unit (1). Work with the open-end wrench (48). The plug (40) and the socket
(41) serve to connect the electronic unit with the vibration plate. Plug one into the other and arrest them
with the sleeve nut of the plug.
Finally, use the screws (46) and disks (45) to attach the sheet metal covers (47 and 49) at the sides to
cover the openings of the electronic unit (30).
e
2.7 Connecting and starting the "fitvib
xcel" vibration device (Fig. 1)
Use the designated connection (21) to connect the manual switch (22).
The power connection (18) is located at the right side of the electronic unit (30). Use the power switch
e
(19) to start the "fitvib
xcel" vibration device.
The device can be operated immediately.

2.8 Deactivation and disposal

e
Observe the following instructions when deactivating the "fitvib
xcel" vibration device:
You may deliver the device including all accessory items to a waste disposal service provider specialized
on electronic products or capable of forwarding the device to such a specialist. In countries where the
suppliers are under the obligation of taking back deactivated electronic devices, you may of course
contact your supplier.
Most countries have by now introduced legislation which prevents consumers from simply throwing their
deactivated electronic products away alongside their ordinary household waste. In the event that you
yourself are responsible for the safe disposal of the system or that you prefer to do it on your own, we
would like to provide you with the following information:
e
The components of the "fitvib
xcel" vibration device can be classified as follows:
Vibration plate, handle with electronic unit, cable, straps and soft mat must be treated like electronic
scrap or light chemical waste. These components contain tin, copper, iron, a range of other metals and
different plastics. Most countries regard these types of products as light chemical waste. Please inform
yourself about the waste disposal regulations which apply in your country.
Packaging materials and instructions can by recycled. You may want to bring them to an appropriate
collecting point or add them to your household waste, depending on how your local waste disposal
system has been organized.
Everything said in this paragraph about the safe disposal of electronic articles applies equally to the
accessory items.
e
10
fitvib
xcel Gebrauchsanweisung, Version 01/2005

Publicité

Table des Matières
loading

Table des Matières