GymnaUniphy fitvib Excel Mode D'emploi page 16

Counting menus
-
- Cu: Exercise counter (up to 999,999, before it starts again at "0")
- Sub-menu bE: counts the operating hours (up to 9999:59 min, before it starts again at "0")
- General menu
- 01: button sound; 1 on, 0 off
- 02: sound signal to mark the end of an exercise; 1 on, 0 off
- 03: time card operation; 1 with time card, 0 without
04: time display; 1 time will be displayed (if no time card has been inserted), 0 time will not be
-
displayed
- Clock menu
- Uh: Use the "MODE" button to select hour – minute – second and the "frequency +" and
"frequency –" buttons to set
- Sub-menu dA: date, use "time +" and "time –" buttons to select (only required for the summer
time / winter time changeover); select and set as under Uh
- Sub-menu t: days of the week, use "time +" and "time –" to select (only required for the summer
time / winter time changeover); set with "frequency +" and "frequency –"
0 = Monday
o
1 = Tuesday
o
2 = Wednesday
o
3 = Thursday
o
4 = Friday
o
5 = Saturday
o
6 = Sunday
o
- Sub-menu So: Automatic switch to summertime; use "time +" and "time –" buttons to select,
"frequency +" and "frequency –" buttons to set
1 Automatic mechanism activated
o
0 Automatic mechanism deactivated, clock must be manually switched for changeover
o
16
e
fitvib xcel Gebrauchsanweisung, Version 01/2005