Chip-Card Based Operation Of The Fitvibexcel; Possible Error Messages In The Top Section Of The Screen; Use Of A Secret Pin Code; How To Programme The Chip Card Pin In The Card Recharging Unit - GymnaUniphy fitvib Excel Mode D'emploi

5. CHIP-CARD BASED OPERATION OF THE
FITVIBEXCEL
If the chip card reader has been activated in the fitvib
operate the device.
A message in the display will ask you to insert the chip card.
The chip card reader (15) is centrally located at the bottom of the control unit (6). The fitvib
card can be easily inserted (following the direction of the arrows) into the chip card reader (15) until it
gently engages. The chip itself has been placed on the front side of the fitvib
e
The fitvib xcel chip card reader only accepts personalized fitvib
The chip cards can be charged with a certain number of minutes. This system limits and restricts the
active vibration time of the fitvib

5.1 Possible error messages in the top section of the screen :

E53: The card is dirty, damaged or has been inserted the wrong way around.
E52: Card of another system or wrong PIN (if in use)
E59: Card cannot be read, card type number has been destroyed.
If you receive other messages, you should contact your supplier or a customer service engineer.

5.2 Use of a secret PIN code:

If you want to secure your device against unauthorized use, you can enter a PIN code for your fitvib
chip card. Any such PIN code can only be entered once!
For this purpose, use the (red) configuration card to enter a four-digit PIN code into the recharge unit.
This PIN code will be automatically applied to all cards on the occasion of their first insertion into the
recharger. It is not possible to subsequently change or modify this number on the cards!
The card reading unit of the fitvib
inserted for the first time into the new device.
You may choose any PIN code number between 0001 and 9999.
e
Important: The fitvib xcel chip cards and the card recharging unit are supplied with a default
setting of 0000 and can be immediately used without any PIN code.
If you need to change your PIN code for a substantial reason, you will not be able to use any of the
e
previously issued fitvib xcel chip cards. Only the manufacturer is able to neutralize them. Please contact
your distributor in such an event.
You can delete the PIN code in the device as follows:
- Insert the (red) configuration card to display the configuration menu.
- Browse through the menu items by using "time+" and "time -".
- Select menu item "Cd".
- Simultaneously push the "Frequency +" and "Frequency –" buttons (pushing the button
"Frequency +" first). This resets the PIN to "0".
- Remove the configuration card.

5.3 How to programme the chip card PIN in the card recharging unit:

- see the manual of the card recharging unit -

5.4 Other options in the set-up menu

Insert a stick into the small hole at the back of the control console and push the button inside to call up
the menus. Use the left/right "start/stop" buttons to browse through the menus.
Use the "time +" and "time – " buttons to select the menu items.
Use the "frequency +" and "frequency –" buttons to modify the values of the individual menu items. Quit
the menu by pushing the inside button with the stick again or by simply not changing any more settings
for about 30 seconds.
e
fitvib xcel User Manual, Version 01/2005
e
xcel (see 5.4), you will need to use time cards to
e
xcel .
e
xcel will automatically integrate this PIN code when a chip card is
e
xcel chip card.
e
xcel chip cards.
e
xcel chip
e
xcel
15