System Function; Performing Calls; How To Call From The External Unit; How To Answer A Call From An Internal Unit - Comelit HFX-9000M Manuel Technique

5. System function

5.1 PERFORMING CALLS

5.1.1 How to call from the external unit

„ To send the call from an external unit, touch the button
corresponding to the user you want to contact.
» On the external unit the caller illumination LED will light
up, the LED will flash and the confirmation tone will
sound. The video image from the external unit will appear
automatically on internal monitor/s.
» If the system is busy: the
external unit will emit the system busy tone.
1

5.2 PAGING CALL

5.2.1 How to initiate a paging call

„ Press to initiate the all-page chime
» After the chime sounds, a 30 seconds message can be
broadcast to all monitors on the system (maximum 8
monitors).
1
A call from the external unit always takes priority over an intercom communication or a paging call
» the call in progress will be terminated for the other devices.
LED will flash and the
the system is busy

5.1.2 How to answer a call from an internal unit

» On receipt of a call from the external unit you will hear the
call ringtone
„ Press to enter into communication with the caller
» the LED will illuminate on the external unit.
„ Press again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
2

5.2.2 How to answer a paging call

„ Press to answer the paging call
» a (300 seconds) point to point conversation between the
two monitor is established.
» the paging call will be terminated for the other devices.
2
37