Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. System function
5.1 PERFORMING CALLS
5.1.1 How to call from the external unit
f To send the call from an external unit, touch the call pad
corresponding to the user you want to contact.
» On the external unit the camera LED will light up, the
will flash and the confirmation tone will sound. The video
image from the external unit will appear automatically on
internal monitor/s.
» If the system is busy: the
unit will emit the system busy tone.
5.1.3 How to transmit a call to the other internal
units
This function can be used to transmit a call to the other internal
units set to the same user code or set to another user code.
f Press the programmed button to send the call
» If the system is busy: the
set to
INT
30
LED
LED will flash and the external
the system is busy
1
LED will flash 4 times
the system is busy
1
f Press the desired key once to activate the function
associated with it.
Wait for approximately 1 sec. before pressing the
same key again. Pressing the same key several times
in quick succession will cancel the command.
5.1.2 How to answer a call from an internal unit
» On receipt of a call from the external unit you will hear the
call ringtone
f Press
to enter into communication with the caller
» the
LED will illuminate on the external unit.
f Press
again to terminate the call.
A call from the external unit always takes priority over
an intercom communication or a paging call
» the call in progress will be ended for the other devices.
2
5.1.4 How to answer a call from an internal unit
» On receipt of a call from the internal unit you will hear the
call ringtone. With "Privacy mode on" the internal unit will
ring in any case.
f Press
to enter into communication with the caller
f Press
again to terminate the call.
A call from the external unit always takes priority over
an intercom communication or a paging call
» the call in progress will be ended for the other devices.
2
Publicité
Chapitres
Table des Matières
