Soft-Touch Key Activation; Intercom Function; How To Transmit A Call To The Other Internal Units; How To Answer A Call From An Internal Unit - Comelit HFX-9000M Manuel Technique

5.3 SOFT-TOUCH KEY ACTIVATION

5.4 INTERCOM FUNCTION

5.4.1 How to transmit a call to the other internal
units
This function can be used to transmit a call to the other internal
units set to the same user code or set to another user code (for
programming see page
touch keys Art. Ex-9000H"
„ Press the programmed button to send the call
» If the system is busy: the
set to
INT
1

5.5 SELF-IGNITION FUNCTION

√ Self-ignition is possible only when the system is in standby
„ Press the self-ignition button (
monitor the video from the external unit.
38
26 "4.2 Configuration Capacitive-
.
LED will flash 4 times
the system is busy
by default) to display on the
MAIN EXTERNAL
UNIT
„ Touch to activate the function keys

5.4.2 How to answer a call from an internal unit

» On receipt of a call from the internal unit you will hear the
call ringtone. With "Privacy mode on" the internal unit will
ring in any case.
„ Press to enter into communication with the caller
„ Press again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
2
„ Press again to cycle through several cameras
If a call is underway with an external unit it is NOT possible
to cycle between the external units
MAIN UNIT 1
UNIT
cycle
UNIT 2 UNIT 3