General Instructions; Technical Specifications; Intended Uses - Soehnle 7730.65.001 Mode D'emploi

3.

GENERAL INSTRUCTIONS

3.1 Technical Specifications

Type 7730.65.001 7730.65.002
Maximum load: 300 kg 300 kg
Division: 100 g 100 g
Length measurement range: - 110 – 210 cm
Tolerance length gauge ± 10 mm
Dimensions (mm) 365 x 490 x 1,140 365 x 490 1,270
Product weight: 15.6 kg 16.4 kg
100 - 240 V
Power supply:
50 - 60 Hz, 250 mA
(Mains adapter, item no.: 2557.05.002 (618.020.097)
Approval class: Approval class III, MPG class 1m
Operating temperature: + 10 °C to + 40 °C
Storage temperature: - 20 °C to + 65 °C
Humidity: 20 % to 85 % relative humidity, non-condensing
Air pressure: 950 to 1.050 hPa
Optional:
Rechargeable battery mode: 7.2 Volt 7.2 Volt
The power supply specifications are noted on the power supply.
The technical documentation to service the unit required by the staff designated by Soehnle
Professional as service staff can be found on a CD included with the unit.

3.2 Intended uses

The unit is used to determine the weight of persons and must only be used for this purpose.
Any other use is prohibited. This scale is intended for transactions with approval requirements.
It meets the applicable requirements of the EC Directives 2014/30/EU, 2014/35/EU, 2014/31/EU
and 93/42/EEA.
Messages concerning errors that can present a danger for the patient or concerning errors that
can result in incorrect scale readings should be reported to the manufacturer's medical products
advisor. This user manual is an integral component of the device. Detailed compliance with this
manual is a condition for the intended use and the correct operation of the unit.
Soehnle Professional only warrants the safety of the device when the instructions are observed
and the device is operated in compliance with the user manual. The device is a medical device
and must only be used by personnel who are able to ensure compliance with generally accepted
operating practices based on their training and experience. Prior to using the device, the user
must verify the operational safety and operational readiness of the device. The user must be
familiar with the operating procedures for the device. The device is not rated for ATEX zones in
www.soehnle-professional.com
34
34