Power Supply - Soehnle 7730.65.001 Mode D'emploi

Then the length rod with the two holders is attached to the stand with 2 pan-head screws each
(see 2)
5.3

Power supply

The scale is powered by a rechargeable battery or a mains unit.
5.3.1 Connect power supply unit
1. Insert the power supply cable into the connecting socket on the rear of the scale.
2. Plug the mains unit into a power supply socket.
Make sure the power outlet remains easily accessible.
Only for rechargeable battery version:
3. Charge the rechargeable battery for 5 hours prior to initial startup. The blue pilot lamp in
the housing light up while the battery is charging. The LED expires as soon as the
battery is fully charged.
The scale must only be operated by staff.
The scale is not intended for operation by the patient.
www.soehnle-professional.com
2
41