Plu Memory (E.g. Saving Various Tare Weights) - Soehnle 7730.65.001 Mode D'emploi

Display output







5.10 PLU memory (e.g. saving various tare weights)

Note:
This function requires the optionally available (from factory only) RS 232 interface (order No.:
2563.41.004). The interface cannot be retrofitted.
The PLU memory (product lookup) has 100 storage locations. The interface is used to write to
PLU memory. Each PLU contains a name, unit weight, and tare weight. The command
<K080Kplu;name;unit;tare> is used for this purpose.
- PLU is the PLU number; the value ranges from 001 to 100
- Name; up to 20 characters (the first 7 characters are displayed)
- Unit is the unit weight; the value is entered in g and with a period as the decimal separator
- Tare is the tare weight; the value is entered in g and with a period as the decimal
The product CD included in the supplied scope contains the PC software PLU Memory, which is
used to transfer the contents from the PC to the scale terminal.
The function key for PLU memory is enabled in setup mode.
See user mode 3710 (
see separate description 470.702.099)
www.soehnle-professional.com
Definition
Sequential number of the alibi entry
Scale type
Year
Sequential number
Gross or net alibi
kg
Tare with alibi identifier
T
kg
Continue paging up or down with the arrow keys (tare / function key)
Display mode is closed with the print key.
Press zero reset key,  is shown in the display.
Close and save the setting: Briefly press the print key together with the
zero reset key. The display switches back to weighing mode.
Using the PLU:
Enable PLU memory by pressing the function key.
PLU and the PLU number is shown in the display.
Press the tare key or the function key to enter the desired PLU number.
Serial number of the
measurement location
 UCAL 4 Pos. 02 = value 9.
separator
45