Setting Up The Scale; Scale Setup And Startup; Mounting The Length Rod (Version 7730.65.002) - Soehnle 7730.65.001 Mode D'emploi

5.

SETTING UP THE SCALE

5.1

Scale setup and startup

The scale is fully assembled on delivery.
- Remove the packaging.
- Place the scale on a firm, level surface. Make sure that cables or other objects are not
pinched under the scale.
- Align the scale by undoing the foot screws. The air bubble in
the spirit level must be right in the centre of the circle.
For setup locations in Germany, this condition has been met when the
floor meets the tolerances specified by DIN 18202 Table 3 row 4.
For other countries, the respectively applicable standards may have to be referenced.
5.2

Mounting the length rod (version 7730.65.002)

The two holders for the length rod are mounted to the length rod with one countersunk screw
each (see 1).
www.soehnle-professional.com
40
1
40