General Information; Safety Instructions - Soehnle 9330 Mode D'emploi

ENGLISH
GB
Compact Scales 9330

1. GENERAL INFORMATION

Application

The Soehnle Professional Compact Scales 9330 is
designed for weighing goods.

Safety instructions


Please read this user manual carefully before
using the equipment for the first time. It contains impor-
tant information concerning the installation, correct use
and maintenance of the equipment.
The manufacturer shall not be held liable if the following
instructions are not observed: The appropriate regula-
tions must be followed when using electrical compo-
nents that have higher safety requirements. Never carry
out work on the equipment while under voltage. Improper
installation will invalidate the warranty. The electrical
connection conditions must conform to the rating values
printed on the power supply unit. The equipment is de-
signed for use inside buildings. Note the permissible am-
bient temperatures for operation (see Technical Data).
The equipment complies with electromagnetic compati-
bility requirements. Do not exceed the maximum values
specified in the standards. If you have any problems,
please contact your service partner.
Cleaning

All you need to clean the equipment is a damp cloth and
a commercially available cleaning agent. Do not use
abrasive cleaning products.
Important: Do not expose the scales directly to water
or excess moisture.
6
Maintenance and Service

These scales do not require regular maintenance. Howev-
er, it is advisable to check their accuracy at regular inter-
vals. The frequency of these checks depends on the type
of use and condition of the scales.
Note

This device is equipped with noise suppression in accord-
ance with European directive 2014/30/EU. However, the
display reading can be affected by extreme electrostatic
or electromagnetic interference, if a radio or mobile
phone is used immediately beside it. Once the source of
interference is removed, it may revert to normal operation.
However, it may be necessary to restart the scales. If there
is permanent electrostatic interference in the area, we
recommend earthing the platform. This device is a meas-
uring instrument. Draft, vibrations, rapid tempe rature chang-
es and direct exposure to sunlight may affect the weight
readings. The scales conform to protection class IP 44.
Avoid high levels of air humidity, steam, aggressive fluids
and dirt contamination.
Warranty/liability

If the supplied goods contain a defect attributable to
Soehnle Professional, Soehnle Professional will be enti-
tled to rectify the defect or provide a replacement. Re-
placed parts will become the property of Soehnle Profes-
sional. If rectification of the defect or the supply of re-
placement parts are still unsuccessful, then the legal pro-
visions will apply. The warranty period covers 2 years
starting from the date of purchase. Please keep your in-
voice as proof of purchase. If your device needs servic-
ing, please contact your dealer or Soehnle Customer Ser-
vice. Soehnle Professional will not accept liability for any
damage resulting from any of the following causes: Un-
suitable or improper storage or utilisation, incorrect as-