Parking Brake Adjustment - Yamaha Motor WARRIOR Manuel Du Propriétaire

1. Locknut
1. Contre-écrou
1. Contratuerca
1. Locknut
1. Contre-écrou
1. Contratuerca
2. Adjusting bolt
2. Boulon de réglage
2. Perno de ajuste
2. Adjusting bolt
2. Boulon de réglage
2. Perno de ajuste

Parking brake adjustment

Parking brake adjustment may be required if
the parking brake does not hold properly.
1. Fully loosen the parking brake cable ad-
justing bolt and locknut on the left lever
holder.
2. Loosen the locknut and adjusting bolt on
the rear brake caliper.
3. Screw in the adjusting bolt by hand until it
feels tight, then screw it out 1/4 turn.
Tighten the locknut to the specified
torque.
Tightening torque:
16 Nm (1.6 m·kg)
CAUTION:
When tightening the locknut, hold the adjust-
ing bolt with a wrench so that the adjusting
bolt does not turn together with the locknut.
8-51
EBU00342