Handlebar Switches - Yamaha Motor WARRIOR Manuel Du Propriétaire

1. Lights switch "LIGHTS"
2. Engine stop switch "ENG. STOP"
3. Start switch "START"
1. Contacteur d'éclairage "LIGHTS"
2. Coupe-circuit du moteur "ENG. STOP"
3. Contacteur du démarreur "START"
1. Interruptor de luces "LIGHTS"
2. Interruptor de paro del motor "ENG. STOP"
3. Interruptor de arranque "START"

Handlebar switches

Engine stop switch "ENG. STOP"
Make sure that the engine stop switch is in the
"RUN" position. The engine stop switch con-
trols ignition and can be used at all times to
stop the engine, especially in an emergency.
The engine will not start or run when the en-
gine stop switch is turned to "OFF".
Start switch "START"
The starter motor cranks the engine when this
switch is pushed.
CAUTION:
See the starting instructions on page 6-3 prior
to starting the engine.
4-5
EBU00053
EBU00054
EBU00647