Drive Chain Slack Adjustment - Yamaha Motor WARRIOR Manuel Du Propriétaire

1. Upper wheel hub nut
1. Écrou supérieur de moyeu de roue
2. Écrou inférieur de moyeu de roue
1. Tuerca superior del buje de la rueda
2. Tuerca inferior del buje de la rueda
1. Locknut 2. Adjusting bolt
1. Contre-écrou
3. Repères d'alignement
1. Contratuerca
3. Marcas de alineación
2. Lower wheel hub nut
3. Alignment marks
2. Boulon de réglage
2. Perno de ajuste

Drive chain slack adjustment

1. Loosen the rear wheel hub nuts.
2. Loosen the adjuster locknuts on each side.
To tighten the chain, turn the chain adjust-
er clockwise. To loosen the chain, turn the
adjuster counterclockwise and push the
wheel forward. Turn each adjuster exactly
the same amount to maintain correct axle
alignment.
There are marks on each side of the swingarm
and on each chain adjuster. Use them to check
for proper alignment.
3. After adjusting, be sure to tighten the lock-
nuts and the wheel hub nuts.
Tightening torque:
Upper wheel hub nut:
120 Nm (12.0 m·kg)
Lower wheel hub nut:
60 Nm (6.0 m·kg)
8-59
EBU00352