Advanced Mode; Usb Management - Cebora KINGSTAR 400 TS Manuel D'instruction

PIN recovery procedure
When an Expert user PIN is forgotten, simply login as Administrator and reset a new user PIN.
When the Administrator PIN is forgotten, a general unlock code (PUK) requested from CEBORA assistance must be
entered.
The PUK is a 16-digit alphanumeric code that is different for each power source.
After receiving the PUK, carry out the following procedure:
Select User Settings
Enter the 16-digit PUK code and confirm with the
pushbutton bearing the checkmark

ADVANCED mode

Please refer to the manual of Item 809.
7�4�4

USB management

This option can be used to carry out various operations with a USB pen drive inserted into one of the two USB ports
on the power source front panel.
When a USB pen drive is inserted into one of the two USB ports, the status bar shows the icon
Remove
Select this option before removing the pen drive from the USB port.
92/109
Select the Administrator user option:
Set a new Administrator profile PIN
Select USB Management and press I�
Turn I and select the relevant item
3301256