Cebora KINGSTAR 400 TS Manuel D'instruction page 94

Restore
Select this job to restore jobs and/or user settings previously saved on a USB pen drive.
Insert the pen drive into one of the two USB ports on the front panel.
Turn I and confi rm Restore
All
Jobs Only (delete exisiting)
Jobs Only (overwrite exisiting)
Jobs Only (keeping exisiting)
Users Only
Export Weldments
A collection of information and data relating to the welds performed can be saved on a USB pen drive for archiving
and/or further processing by the end customer.
The data are exported in CSV format.
Weldments can be exported from a webapp with a PC connected to the power source via a LAN, using the Ethernet
port fi tted to each power source. The exported data can be saved in CSV or PDF format, with up to 1000 records per
fi le.
Export Diagnostic
Exports diagnostic data on errors that have occurred in the welding machine power source to a USB drive The
exported fi le is in PDF format.
The diagnostic data can also be exported from the webapp as described for Weldments.
Load Dealer Infos
Allows a second power source start-up screen to be customised with the dealer's data and logo. Ask CEBORA
technical assistance for details of the procedure.
94/109
Select the relevant option.
Restore all jobs and user settings.
Restore jobs saved on the pen drive by deleting existing
ones
Restore jobs saved on the pen drive by overwriting
existing ones
Restore jobs saved on the pen drive, keeping the existing
ones
Restore only the list of users (Item No 809 CHECK)
3301256