Webapp - Cebora KINGSTAR 400 TS Manuel D'instruction

WEBAPP

8
KINGSTAR range power sources have a built-in webserver that allows access to machine functions through an
Ethernet link.
To confi gure the webserver, set the LAN parameters (see section 7.4.5).
The Webapp consists of a Service Panel where it is possible to:
♦
Display available synergic curves
♦
Display parameter values of welds performed
♦
To back up and restore (see section 7.4.4).
♦
Display power source diagnostic data (see section 7.2).
The Webapp can also manage a virtual control panel (Remote Panel), which basically replicates the welding power
source control panel on the PC or tablet.
The Remote Panel requires the use of a display of adequate size, i.e. at least 7", like the display on a tablet. A
smartphone display is not big enough.
98/109 3301256