Rizzoli TE 60 Manuel D'utilisation page 58

3. Open the cap of the tank.
5. The wood must be placed horizontally with care,
avoid to juxtapose the chunks.
Picture 12 – Instructions for a correct use by tank loading.
During the working with extended autonomy of
the stove, it could happen a short absence of flame
in the combustion chamber even the combustible
4. Load the tank with thin broken wood chunks
and later with pieces of small and medium size
with maximum length 33 cm.
6. Close hermetically the cap, open the fire door
and start the combustion using specific products.
is still located in the tank. The combustion process
is not interrupted, the flame will be stronger as far
as the wood will get off falling from the tank.
56