6.1.2 leds during operation without operating unit
During operation of the Control Electronics 8605 without operating unit, the
operating status is indicated by two LEDs.
Illustration 6-2: LEDs on version without operating unit
6.2 Basic function
The Control Electronics, Type 8605, is suitable for the control of all Bürkert
proportional valves with a max. current in the range from 40 to 2000 mA.
It transforms an external standard signal into a pulse-width modulated volt-
age signal (PWM) that is supplied to the solenoid coil of the proportional
valve (see Illustration 6-3: Basic function of the Control Electronics, Type
8605). A given value of the average coil current is thereby assigned to each
value of the input signal. The proportional opening of the valve can be set via
the coil current.
0 ... 5/10 V
0/4 ... 20 mA
Illustration 6-3: Basic function of the Control Electronics, Type 8605
0 to 5 V, 0 to 10 V, 0 to 20 mA or 4 to 20 mA can be set as standard sig-
nals.
16 - 8605
LED green
LED yellow
standard
p
1
Legend
1 green: Device in operation
2 yellow: Current through valve
Current through valve
load