Maintenance And Repairs; Ec Declaration Of Conformity - Stihl MSA 160 T Notice D'emploi

English

Maintenance and Repairs

Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
80
Disposal
Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.

EC Declaration of Conformity

ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
Germany
declare in exclusive responsibility that
the product
Category: Cordless chain
saw
Make: STIHL
Model: MSA 160 T:
Serial identification: 1252
conforms to the relevant provisions of
Directives 2006/42/EC, 2014/30/EU,
2000/14/EC and 2011/65/EU and has
been developed and manufactured in
compliance with the following standards
in the versions valid on the date of
production:
1)
EN 60745-1, EN 11681-2
EN 55014-1, EN 55014-2
The measured and guaranteed sound
power levels were determined according
to Directive 2000/14/EC, Annex V.
Measured sound power level
93 dB(A)
Guaranteed sound power level
95 dB(A)
The EC type examination in accordance
with Directive 2006/42/EC Article
12.3(b) was carried out at
1)
where applicable
,
MSA 160 T