Maintenance And Repairs; Important Safety Instructions - Stihl MS 200 Notice D'emploi

Maintenance and Repairs

Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
MS 200
Important Safety
Instructions
1 Fatigue causes carelessness. Be
more cautious before rest periods
and before the end of your shift.
2 Safety clothing required by your
safety organizations, government
regulations, or your employer
should be used; otherwise, snug
fitting clothing, safety foot-wear, and
hand and hear protection should be
worn.
3 Before fuelling, servicing, or trans-
porting your chain saw, switch off
the engine. To help prevent fire,
restart your chain saw at least 3 m
from the fuelling area.
4 When using a chain saw, a fire
extinguisher should be available.
5 When felling, keep at least 2 1/2 tree
lengths between yourself and your
fellow workers.
6 Plan your work, assure yourself of
an obstacle-free work area and, in
the case of felling, of an escape
path from the falling tree.
7 Follow instructions in your
operator's manual for starting the
chain saw and control the chain saw
with a firm grip on both handles
when it is in operation. Keep
handles dry, clean and free of oil. A
chain saw should never be carried
with the engine running.
8 When transporting your chain saw,
use the appropriate transportation
covers that should be available for
the guide bar and saw chain.
9 Never operate a chain saw that is
damaged or improperly adjusted or
that is not completely and securely
assembled. Be sure that the saw
chain stops moving when the
throttle control trigger is released.
Never adjust the guide bar or saw
chain when the engine is operating.
10 Beware of carbon monoxide
poisoning. Operate the chain saw in
well ventilated areas only.
11 Do not attempt a pruning or limbing
operation in a standing tree unless
specifically trained to do so.
12 Guard against kickback. Kickback is
the upward motion of the guide bar
that occurs when the saw chain, at
the nose of the guide bar, contacts
an object. Kickback can lead to
dangerous loss of control of the
chain saw.
13 The chain saw is intended for two-
handed use. Serious injury to the
operator, helpers, and/or
bystanders can result from one-
handed operation.
14 When carrying the chain saw with
the engine running, engage the
chain brake.
15 Allow your chain saw to cool before
fuelling, and do not smoke.
16 Don't allow other persons or
animals close to a running chain
saw or close to where a tree is being
felled.
17 Use extreme caution when cutting
small size brush and saplings
because slender material may catch
the saw chain and be whipped
toward you.
English
43