Gas Cylinder Connection - Rösle Videro G3 Mode D'emploi

Do not use abrasive cleaners on the grill grates or the grill. Doing so may damage the surface.
To protect the food being barbecued and the grill, the temperature should not be allowed to exceed 350 °C
/ 662 °F. Excessively high temperatures may cause parts of the grill to deform.
Some (chemical/poisonous) by-products produced when barbecueing, especially if the appliance is
not used properly, can be harmful to health. This can lead to cancer, problems in pregnancy and
other consequential harm.

Gas cylinder connection

Make sure that the valve of the gas cylinder is turned off as indicated by the mark on the gas
cylinder.
Never use a naked flame to look for gas leaks. Before checking for leaks, make sure that there
are no potential sources of sparks or naked flames close by. Sparks or flames could cause an ex-
plosion, which could result in very serious or even fatal injuries or damage to property.
The gas pressure regulators used have a union nut with a left-hand thread for screwing onto the gas
cylinder valve. Follow the relevant instructions for connecting the regulator.
Gas valve lightning
• Insert 4 batteries 1,5 V type AA into the compartment inside the storage space.
• Open the doors at the front, see fig. next page. Make sure the polarity is correct.
• Close the cover of the battery compartment.
• For switching on the lightning press button 5 (p. 35) at the right side of the operating panel.
33