Installing The Running Wheels; Installing The Brake Spur; Installing The Transport Wheel - Stihl MH 710 Manuel D'utilisation

● Place cover (N) and coupler (M) on
drive shaft (1).
● Tighten the locking screw on
coupler (M).
The hoe is marked with a sticker
(L - left).
● Position hoe (B2) so that the bores in
the shaft mount and the drive shaft
align.
● Push hoe (B2) onto the drive shaft.
18
● Insert folding retainer (L) through the
bore and close the securing clip.

7.4 Installing the running wheels

The running wheels are installed in the
same way as the hoes.

7.5 Installing the transport wheel

● Tilt the basic unit back slightly with the
help of a second person and hold it.
● Fasten transport wheel (O) at the rear
bore with bolt (U5), washer (V6) and
nut (W6).
● Additionally secure transport wheel (O)
with pin (X2) and spring clip (Y).

7.6 Installing the brake spur

● 1 Fasten bolts (U1) to brake spur
mount (F) using nuts (W1).
0478 404 8805 A - EN