Machine Operation; Lowering The Brush-Deck; Setting The Cleaning Controls; Setting The Water Flow Rate - Numatic TTB-1620/100 Mode D'emploi

Lowering the brush deck
The control for lowering the brush deck can be found to the rear of the machine (fig 18).
Lower the brush deck by moving the left hand release lever to the upper position (see fig. 19).
Turning the Machine on

Setting the Water Flow Rate

Machine Operation

Fig.18

Setting the Cleaning Controls

Insert the key into the master control on/off and quarter-turn it clockwise to the 'ON' position.
The battery charge-level indicator will illuminate for 5 seconds.
Set Water Flow Rate as required, depending on floor type and level of soiling
0.13 gpm
0.26 gpm
0.52 gpm
0.79 gpm
19
Fig.19