Numatic TTB-1620/100 Mode D'emploi page 15

!
Please read before commencing any operation.
After the removal of all the packaging, carefully open and check the contents of the start up pack (fig.1).
1
Fig.1
2
Lift top tank assembly to reveal battery compartment, ensuring you use the handle grip
provided (fig.1).
Fit battery fuses (contained in start-up pack) into the battery fuse holders as illustrated (fig.2).
Note: Wear suitable gloves when inserting fuses.
Note: Ensure that no metal objects come into contact with battery terminals while the batteries are exposed.
When inserting the first fuse you may notice a spark, this is normal.
3
Fig.3
Quick Set Up Guide
Use Handle Grip when raising or lowering the top waste tank.
Fig.1
15
Contents:
1 x Operator Manual
1 x Battery charging lead
2 x Keys
2 x 50 amp fuses (1 x spare)
1 x Maxi fuse-puller
Fig.2
Using the control handle with both hands and slowly
push the machine off of the pallet (fig.3),
!