How To Remove And Install: Door - Progress PHN23103X Notice D'utilisation

18 Progress
How to use: Aqua Clean
This cleaning procedure uses humidity to
remove remaining fat and food particles
from the oven.
Step 1 Pour water into the cavity em‐
bossment: 150 ml.
Step 2
Set the function:

How to remove and install: Door

The oven door has two glass panels. You can remove the oven door and the internal
glass panel to clean it. Read the whole "Removing and installing door" instruction before
you remove the glass panels.
CAUTION! Do not use the oven without the glass panels.
Step 1 Open the door fully and hold
both hinges.
Step 3 Close the oven door halfway
to the first opening position.
Then lift and pull forward and
remove the door from its seat.
Step 5 Turn the fasteners by 90° and
remove them from their seats.
Step 3
Step 4
Step 5
Step 6
.
Step 2
Step 4
Step 6
Set the temperature to 90 °C.
Let the oven work for 30 min.
Turn off the oven.
Wait until the oven is cold. Dry
the cavity with a soft cloth.
Lift and turn the levers fully on
both hinges.
Put the door on a soft cloth on
a stable surface and release
the locking system to remove
the internal glass panel.
First lift carefully and then re‐
move the glass panel.