How To Remove: Shelf Supports; How To Remove And Install: Door - Progress PHN13002X Notice D'utilisation

16 Progress

How to remove: Shelf supports

Remove the shelf supports to clean the
oven.
Step 1 Turn off the oven and wait un‐
til it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
Step 4 Install the shelf supports in
the opposite sequence.
How to use: Aqua Clean
This cleaning procedure uses humidity to
remove remaining fat and food particles
from the oven.
Step 1 Pour water into the cavity em‐
bossment: 150 ml.
Step 2
Set the function:

How to remove and install: Door

The oven door has two glass panels. You can remove the oven door and the internal
glass panel to clean it. Read the whole "Removing and installing door" instruction before
you remove the glass panels.
CAUTION! Do not use the oven without the glass panels.
Step 1 Open the door fully and hold
both hinges.
Step 3
Step 4
Step 5
Step 6
.
Step 2
2
1
Set the temperature to 90 °C.
Let the oven work for 30 min.
Turn off the oven.
Wait until the oven is cold. Dry
the cavity with a soft cloth.
Lift and turn the levers fully on
both hinges.