How To Remove: Shelf Supports - Progress PHN23103X Notice D'utilisation

Notes on cleaning
Cleaning
Agents
Everyday
Use
Accessories

How to remove: Shelf supports

Remove the shelf supports to clean the
oven.
Step 1 Turn off the oven and wait un‐
til it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
Step 4 Install the shelf supports in
the opposite sequence.
Clean the front of the oven with a soft cloth with warm water and a mild de‐
tergent. Clean and check the door gasket around the frame of the cavity.
Use a cleaning solution to clean metal surfaces.
Clean stains with a mild detergent.
Clean the cavity after each use. Fat accumulation or other residue may
cause fire.
Moisture can condense in the oven or on the door glass panels. To decrease
the condensation, let the oven work for 10 minutes before cooking. Do not
store the food in the oven for longer than 20 minutes. Dry the cavity with a
soft cloth after each use.
Clean all accessories after each use and let them dry. Use a soft cloth with
warm water and a mild detergent. Do not clean the accessories in a dish‐
washer.
Do not clean the non-stick accessories using abrasive cleaner or sharp-
edged objects.
2
1
Progress 17