If the gas cylinder valves are more than one metre apart, the addition-
al kit (part no. 50020-61100) may be used.
Figure 5
– Check the hose connection at the inlet of the gas filter / DuoControl CS
for leaks (e.g. using a leak-finder spray in accordance with EN 14291).
– After installation, have the entire gas system checked by an expert
for leaks and proper installation.
– If there is a gas testing certificate, this must be supplemented or
changed accordingly.
This test does not replace the regularly scheduled gas check!
– All functions must then be tested in accordance with the operating
instructions.
– The operating instructions must be given to the operator.
Sticker
The provided sticker must be affixed in the cylinder box.
EN
18