Duocontrol Cs Installation And Connection - Truma DuoControl CS vertikal Instructions De Montage

DuoControl CS installation and connection

The DuoControl CS must be installed in such a way that the high-pres-
sure hose connections are in the highest possible position, which must
be at least higher than the cylinder valve level (broken line).
The high-pressure hoses must slope downwards all the way to the
cylinder valve.
Figure 2
Installation above the cylinder valves makes it more difficult for
gas in the liquid phase to penetrate the gas pressure regulator,
particularly while driving.
The DuoControl CS is connected to the high-pressure hose via the
M20 x 1.5 (G.13) male thread on the inlet side and is connected to the
gas pipe via an 8 mm or 10 mm olive screw connection (H.9) on the
outlet side.
The DuoControl CS is intended for installation in the gas cylinder box
of the caravan or motor home.
EN
15