Transporting; Transporting The Chain Saw; Transporting The Battery; Storing - Stihl MSA 120 C Notice D'emploi

Masquer les pouces Voir aussi pour MSA 120 C:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

English

14 Transporting

14.1 Transporting the Chain Saw

► Switch off the chain saw, engage the chain brake and
remove the battery.
► Fit the scabbard so that it completely covers the guide bar.
► Carry the saw by the handlebar with the guide bar pointing
to the rear.
► Transporting the saw in a vehicle: Secure the saw to
prevent it turning over or shifting.

14.2 Transporting the Battery

► Switch off the chain saw, engage the chain brake and
remove the battery.
► Make sure the battery is in a safe condition.
► Observe the following points when packing the battery:
– The packaging must be non-conductive.
– Make sure the battery cannot shift inside the packaging.
► Secure the packaging so that it cannot move.
The battery is subject to the requirements for the transport
of dangerous goods. The battery is classified as UN 3480
(lithium-ion batteries) and has been tested in accordance
with UN Manual of Tests and Criteria, Part III, sub-section
38.3.
For transport regulations see www.stihl.com/safety-data-
sheets

15 Storing

15.1 Storing the Chain Saw

► Switch off the chain saw, engage the chain brake and
remove the battery.
► Fit the scabbard so that it completely covers the guide bar.
► Observe the following points when storing the saw:
78
– Saw is out of the reach of children.
– The saw is clean and dry.

15.2 Storing the Battery

STIHL recommends that you store the battery with a charge
between 40% and 60% (2 LEDs glow green).
► Observe the following points when storing the battery:
– Battery is out of the reach of children.
– Battery is clean and dry.
– Battery is in an enclosed space.
– Store the battery separately from the saw and charger.
– Battery is in non-conductive packaging.
– Battery is in a temperature range between -10°C and
+50°C.

15.3 Storing the Charger

► Unplug the mains plug from the socket.
► Remove the battery.
1
► Roll up the connecting cord and attach it to the charger.
► The charger should be stored in such a way that the
following conditions are met:
– The charger is out of the reach of children.
– The charger is clean and dry.
– The charger is in an enclosed room.
– The charger is separate from the battery.
14 Transporting
2
0458-716-9621-B

Publicité

Table des Matières
loading

Table des Matières