Parkside PAT 20-Li A1 Traduction De La Notice Originale page 42

˜ Clearing jammed staples/nails
WARNING!
m
If a staple or nail is jammed, do not
pull the trigger
2 ] [
otherwise be triggered accidentally by
the product after removing the staples
or nails.
Remove the battery pack
the product before clearing the
jammed staples or nails.
1. Open the magazine
push rod from the product.
8 ] [
2. Remove the jammed staples/nails from
the magazine.
˜ Cleaning and care
WARNING!
m
Remove the battery pack
and let the product cool down
before performing inspection,
maintenance and cleaning work!
Never allow uids to get into
the product.
The product must always be kept
clean, dry and free from oil or grease.
Remove debris from the product after
each use and before storage.
Regular and proper cleaning will help
o
ensure safe use and prolong the life of
the product.
Clean the product with a dry cloth. Use
o
a soft brush for areas that are hard
to reach.
40 GB/IE
! Staples or nails may
from
[ ]
by pulling the
7 ] [
[ ]
NOTE
Do not use chemical, alkaline,
u
abrasive or other aggressive
detergents or disinfectants to
clean this product as they might be
harmful to its surfaces.
˜ Maintenance
WARNING!
m
Remove the battery pack
and let the product cool down
before performing inspection,
maintenance and cleaning work!
The product is maintenance-free.
o
Before and after each use, check the
o
product for wear and damage.
˜ Repair
This product does not contain any
o
parts that can be repaired by the user.
Contact an authorised service centre
or a similarly qualified person to have it
checked and repaired.
˜ Storage
WARNING!
m
Remove the battery pack
let the product cool down.
Store the battery pack separately.
o
Remove staples or nails from the
o
magazine .
7 ] [
Clean the product (see "Cleaning and
o
care").
Store the product in a dark, dry, frost-
o
free, well-ventilated place.
[ ]
and
[ ]