Parkside PAT 20-Li A1 Traduction De La Notice Originale page 40

Removing the battery pack
1. Press down the release button
the battery pack.
2. Remove the battery pack from the
battery port.
˜ Preparation
WARNING!
m
Always remove the battery
pack before filling in or
[ ]
changing nails or staples.
˜ Choosing the correct length
for nails and staples
Consider 2 factors to choose the
o
correct length for staples and nails:
the thickness of the material to
—
be fastened
the composition and hardness of the
—
base material
NOTE
To ensure su cient holding force it
u
is recommended to choose staples
or nails with a length that equals up
to twice the thickness of the material
to be fastened.
˜ Adding staples
(Fig. E)
1. Turn the product around so that the
push rod is facing up.
8 ] [
2. Squeeze the release buttons
3. Pull the push rod
magazine .
7 ] [
NOTE
Use the window of the fill indicator
u
to check if the magazine is empty.
9 ] [
38 GB/IE
of
[ ]
.
6 ] [
out of the
8 ] [
(Fig. F)
4. Add staples to the magazine.
5. Slide the push rod back in until the
magazine is completely closed.
6. The release buttons must click into
place to indicate that the magazine is
properly locked.
˜ Adding nails
(Fig. E)
1. Turn the product around so that the
push rod is facing up.
[ 8 ]
2. Squeeze the release buttons
3. Pull the push rod
magazine .
7 ] [
NOTE
Use the window of the fill indicator
u
to check if the magazine is empty.
9 ] [
(Fig. G)
4. Identify the nail icon
rod and insert the nails into the
[ 8 ]
magazine .
7 ] [
5. Slide the push rod in until the
magazine is completely closed.
6. The release buttons
place to indicate that the magazine is
properly locked.
NOTE
The scale gives an indication
[ ]
u
about how many fasteners are left in
the magazine
7 ] [
.
6 ] [
out of the
8 ] [
on the push
must click into
6 ] [
.