Parkside PAT 20-Li A1 Traduction De La Notice Originale page 33

Vibration emission value
Vibration emission values (triaxial vector
sum) determined according to EN 60745:
Uncertainty K
Vibration emission value a
Uncertainty K
WARNING!
m
Wear ear protection!
NOTE
The declared vibration total value
u
and the declared noise emission
value have been measured in
accordance with a standard test
method and may be used for
comparing one tool with another.
The declared total vibration value
u
and the declared noise emission
value may also be used for a
preliminary assessment of exposure.
WARNING!
m
The vibration and noise emissions
u
during actual use of the power tool
can differ from the declared values
depending on the manner in which
the tool is used, especially what kind
of workpiece is processed.
Try to minimise exposure to vibration
and noise. Examples of measures
to reduce vibration include wearing
gloves when using the tool and
limiting working time. All parts of the
operating cycle must be taken into
account (e.g. times when the power
tool is switched off and when it is
running idle in addition to the trigger
time).
˜ General power tool safety
: 3 dB
: 4.645 m/s
2
h
: 1.5 m/s
2
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Work area safety
1) Keep work area clean and well
2) Do not operate power tools in
3) Keep children and bystanders
Electrical safety
1) Power tool plugs must match the
Safety instructions
warnings
WARNING!
m
Read all safety warnings, instructions,
ill strations and speci cations
provided with this power tool. Failure
to follow all instructions listed below
may result in electric shock fire and/or
serious injury.
lit Cluttered or dark areas invite
accidents.
explosive atmospheres, such as in
the presence o
gases or d st Power tools create
sparks which may ignite the dust or
fumes.
away while operating a power
tool Distractions can cause you to
lose control.
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools Unmodified plugs and
matching outlets will reduce risk of
electric shock.
ammable li ids
GB/IE 31