Parkside PAT 20-Li A1 Traduction De La Notice Originale page 35

Power tool use and care
1) Do not force the power tool. Use
the correct power tool for your
application The correct power tool
will do the job better and safer at the
rate for which it was designed.
2) Do not use the power tool if the
switch does not turn it on and
o Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
3) Disconnect the plug from the
power source and/or the battery
pack from the power tool before
making any adjustments, changing
accessories, or storing power
tools Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
4) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool Power tools are
dangerous in the hands of untrained
users.
5) Maintain power tools and
accessories. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that ma a ect the
power tool's operation. If damaged,
have the power tool repaired before
se Many accidents are caused by
poorly maintained power tools.
6) Keep cutting tools sharp and
clean Properly maintained cutting
tools with sharp cutting edges are less
likely to bind and are easier to control.
7) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the wor to be per ormed Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
8) Keep handles and grasping surfaces
dry, clean and free from oil and
grease Slippery handles and
grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations.
Battery tool use and care
1) Recharge only with the charger
speci ed b the man act rer A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
2) Use power tools only with
speci call designated batter
pac s Use of any other battery
packs may create a risk of injury and
fire.
3) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal
to another Shorting the battery
terminals together may cause burns
or a fire.
4) Under ab si e conditions li
be ejected from the battery; avoid
contact. If contact accidentally
occ rs sh with water I li
contacts eyes, additionally seek
medical help Liquid ejected from the
battery may cause irritation or burns.
Service
1) Have your power tool serviced by a
ali ed repair person sing onl
identical replacement parts This
will ensure that the safety of the
power tool is maintained.
id ma
id
GB/IE 33