Parkside PAT 20-Li A1 Traduction De La Notice Originale page 36

˜ Stapler/Nailer safety
warnings
WARNING! RISK OF INJURY!
m
Do not point the tool towards
u
yourself or anyone nearby.
Make sure that no other people or
u
animals are on the other side of
the workpiece or in the immediate
vicinity.
WARNING! PROTECT YOUR EYES!
m
Wear safety goggles. This
also applies to people who
are carrying out support
during operation.
Secure the workpiece!
A workpiece securely held by a
clamping device or vice is much
safer than one held in your hand.
1) Always assume that the tool
contains fasteners. Careless
handling of the tacker can result in
unexpected firing of fasteners and
personal injury.
2) Do not point the tool towards
yourself or anyone nearby.
Unexpected triggering will discharge
the fastener causing an injury.
3) Do not actuate the tool unless the
tool is placed rml against the
workpiece. If the tool is not in contact
with the workpiece, the fastener may
be de ected away from your target.
4) Disconnect the tool from the
power source when the fastener
jams in the tool. While removing a
jammed fastener, the tacker may be
accidentally activated if it is plugged
in.
34 GB/IE
5) Use caution while removing a
jammed fastener. The mechanism
may be under compression and the
fastener may be forcefully discharged
while attempting to free a jammed
condition.
6) Do not use this tacker for fastening
electrical cables. It is not designed
for electric cable installation and may
damage the insulation of electric
cables thereby causing electric shock
or fire hazards.
˜ Vibration and noise reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-noise
operating modes as well as wear personal
protective equipment.
Take the following points into account to
minimise the vibration and noise exposure
risks:
Only use the product as intended by
its design and these instructions.
Ensure that the product is in good
condition and well maintained.
Keep tight grip on the handles/
grip surface.
Maintain this product in accordance
with these instructions and keep it well
lubricated (where appropriate).
Plan your work schedule to spread any
high vibration tool use across a longer
period of time.
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this
product by means of this instruction
manual. Memorise the safety warnings
and follow them to the letter. This will help
to prevent risks and hazards.